Innovative Integration
 
Log inUsernamePassword
Log me on automatically each visit    
Register
Register
Log in to check your private messages
Log in to check your private messages
Runtime error (MS Visual C++)

 
Post new topic   Reply to topic    II Support Forum Index -> X3-10M
View previous topic :: View next topic  
Author Message
kaidettmann



Joined: 25 Oct 2008
Posts: 16

PostPosted: Mon Nov 16, 2009 9:03 am    Post subject: Runtime error (MS Visual C++) Reply with quote

Hi,



I used a default simulink example to generate a hw co-sim library block. This worked fine.

Subsequently, I used this block within a basic simulation environment (only scope as output). After clicking on "Start simulation" in the model, a window popped up with the title: "JTAG Hardware Co-simulation". Content: "Initializing JTAG Hardware Co-simulation Status: Loading JTAG driver".

After a certain while the below described error message appears and MATLAB terminates.

We de-installed MS Visual C++; no success.
We updates the graphic card driver; no success.
We tired the hint from your message board (http://forums.xilinx.com/xlnx/board/message?board.id=DS
PTOOL&thread.id=2018); no success.
We installed the newest java version; no success.
We contacted Xilinx; they could not help us.

What shall I try/do/install?

Thank you (again),
Kai
Back to top
View user's profile Send private message
amane



Joined: 17 Apr 2006
Posts: 118
Location: Simi Valley

PostPosted: Mon Nov 16, 2009 1:09 pm    Post subject: Reply with quote

Hi Kai,
It seems like you are not using the right s/w toolset.

If you are using ISE 11.3 then, the correct toolset is

● Microsoft Windows XP professional Sp2
● One of the following versions of MATLAB from Mathworks Inc.
1. Matlab 7.8 (R2009a) /Simulink V7.3 (R2009a)
2. Matlab 7.9 (R2009b) /Simulink V7.4(R2009b)
Note : Matlab/Simulink must be installed in a directory with no spaces
● Xilinx System Generator 11.3
● Xilinx ISE Foundation 11.3 or later along with ISE simulator
Some other features in System Generator require following software components to be installed:
● HDL simulator required for HDL cosimulation using Xilinx System Generator and Simulink.System Generator
HDL co-simulation interfaces are compatible with Xilinx ISE Simulator, ModelSim Xilinx Edition MXE (an option
with ISE Foundation) and ModelSim PE or SE, version v6.5b or later, from Model Technology Inc.
● Xilinx Chipscope Pro 11.1 is required for on chip debugging
Note: Please make sure that Microsoft windows Environment variable $Xilinx must be set and point to your ISE software
installation directory. Any new further updates may be downloaded from Xilinx Download center.

Sincerely,
Amit Mane
System Engineer
Innovative Integration Inc,
Simi Valley , Ca 93065
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    II Support Forum Index -> X3-10M (GMT - 8 Hours)
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

© Copyright 2006-2012 Innovative Integration
Powered by phpBB © 2001, 2002 phpBB Group
Based on iCGstation v1.0 Template By Ray © 2003, 2004 iOptional