jhenderson
Site Admin
Joined: 07 Mar 2006
Posts: 2267
Location: So. Cal. USA
|
 Posted: Thu Apr 29, 2010 9:52 am Post subject: GPS PPS signal routing patch |
 |
|
Attached is a modified ePC logic to provide GPS PPS signal to the mezzanine card. Use the EEPROM application to burn this logic into the card.
The jumper wires to add to the mezzanine card are
Connector P1, pin 21 -> Connector P2, pin 2
Connector P1, pin 46 -> Connector P3, pin 2
These are the two PPS signals from the ePC FPGA. |
|
