| View previous topic :: View next topic |
| Author |
Message |
jfrigo
Joined: 13 Apr 2010
Posts: 2
|
 Posted: Tue Apr 13, 2010 9:47 am Post subject: X5-210 eInstrument: Time stamping data flow on V5 with GPS |
 |
|
| We have the X5-210 eInstrument with GPS. I was looking at how to route the pps signal, abs time and enable to the V5 so I can time stamp our data flow with a fine grain time stamp. It seems there are a few options for doing with this system, I would like to discuss. Please contact me at your earliest convenience. |
|
| Back to top |
|
 |
jhenderson
Site Admin
Joined: 07 Mar 2006
Posts: 2267
Location: So. Cal. USA
|
| Posted: Thu Apr 29, 2010 10:02 am Post subject: |
|
|
To accomplish this, the GPS signal must be routed to the J16 connector on the XMC module. The easiest way to accomplish that is via a patch to the mazzanine card option for the ePC.
See forum post http://www.iidsp.com/forum/viewtopic.php?p=3654#3654 |
|
| Back to top |
|
|
|
