| View previous topic :: View next topic |
| Author |
Message |
shackleton
Joined: 20 Oct 2009
Posts: 10
Location: Italy
|
 Posted: Wed May 12, 2010 12:10 am Post subject: TX hw-cosim block generation problem |
 |
|
Dear Sirs,
trying to generate a hw-cosim block for the SRAM_DAC.mdl example for the TX board, the netlister issues this error message:
"ctl_reg13 A non-memory mapped port named 'ctl_reg13' was not defined by the current compilation target. Please report this error to the supplier of the hardware co-simulation plugin"
Maybe the BSP file is not updated? Do you have any suggestions?
Thank you in advance.
shackleton |
|
| Back to top |
|
 |
jhenderson
Site Admin
Joined: 07 Mar 2006
Posts: 2250
Location: So. Cal. USA
|
| Posted: Wed May 12, 2010 5:00 am Post subject: |
|
|
The latest X5-TX firmware was release 2/1/2010:
Firmware release v2.1
- ISE 11.3 Support for Matlab BSP using Matlab 2009a and 2009b.
-- Added new flow for Matlab BSP compilation
-- Added Matlab BSP manual
Are you using this release? What version of ISE and Matlab are you using? |
|
| Back to top |
|
|
shackleton
Joined: 20 Oct 2009
Posts: 10
Location: Italy
|
| Posted: Wed May 12, 2010 5:44 am Post subject: |
|
|
| jhenderson wrote: | The latest X5-TX firmware was release 2/1/2010:
Firmware release v2.1
- ISE 11.3 Support for Matlab BSP using Matlab 2009a and 2009b.
-- Added new flow for Matlab BSP compilation
-- Added Matlab BSP manual
Are you using this release? What version of ISE and Matlab are you using? |
Hi jhenderson,
I am not using the X5-TX board but the TX one based on Virtex 2Pro.
Thank you.
I hope hearing from you. |
|
| Back to top |
|
|
shackleton
Joined: 20 Oct 2009
Posts: 10
Location: Italy
|
| Posted: Thu May 13, 2010 2:26 am Post subject: |
|
|
| jhenderson wrote: | The latest X5-TX firmware was release 2/1/2010:
Firmware release v2.1
- ISE 11.3 Support for Matlab BSP using Matlab 2009a and 2009b.
-- Added new flow for Matlab BSP compilation
-- Added Matlab BSP manual
Are you using this release? What version of ISE and Matlab are you using? |
jhenderson,
for your information the tools version are:
ISE 9.2.04i;
System Generator 9.2.00.967;
Matlab 7.4.0.287 (R2007a);
Do you have some suggestions? Or, exists a more recent BSP for TX (not X5-TX) board?
Thank you again. |
|
| Back to top |
|
|
amane
Joined: 17 Apr 2006
Posts: 118
Location: Simi Valley
|
| Posted: Fri May 14, 2010 10:00 am Post subject: |
|
|
Hi,
Last release for PMC-TX was with this s/w toolset.
Matlab R2006 A
Xilinx ISE 8.2 SP2
We will upgrade the framework logic to 11.3 and BSP.
The new version will be available within few days.
We will notify as soon as the new version gets released.
Sincerely,
Amit |
|
| Back to top |
|
|
shackleton
Joined: 20 Oct 2009
Posts: 10
Location: Italy
|
| Posted: Mon May 17, 2010 2:25 am Post subject: |
|
|
| amane wrote: | Hi,
Last release for PMC-TX was with this s/w toolset.
Matlab R2006 A
Xilinx ISE 8.2 SP2
We will upgrade the framework logic to 11.3 and BSP.
The new version will be available within few days.
We will notify as soon as the new version gets released.
Sincerely,
Amit |
Hi Amit,
do you think new BSP will works with the couple of tools I have (System Generator 9.2.00.967; Matlab R2007a)?
However I wait for you to notify me the availability of new version.
Thank you.
shackleton |
|
| Back to top |
|
|
amane
Joined: 17 Apr 2006
Posts: 118
Location: Simi Valley
|
| Posted: Mon May 17, 2010 7:36 am Post subject: |
|
|
Hi,
Could you please update me with the date of purchase and possibly PO number ?
Sincerely,
Amit |
|
| Back to top |
|
|
|
