| View previous topic :: View next topic |
| Author |
Message |
jhatcher
Site Admin
Joined: 21 Jan 2009
Posts: 33
Location: Simi Valley
|
 Posted: Tue Mar 22, 2011 3:28 pm Post subject: Terminal Breakout for DIO signals for all X3 modules |
 |
|
| These are the Breakout Box terminal connections for the DIO signals coming from the P16 connector on all X3 modules. |
|
| Back to top |
|
 |
lpagli
Joined: 22 Mar 2011
Posts: 5
|
| Posted: Wed Mar 23, 2011 2:01 am Post subject: |
|
|
Dear jhatcher,
yesterday I opened this topic http://www.iidsp.com/forum/viewtopic.php?t=1633
Mr jhenderson in it suggested me to follow another topic to obtain the MDR 68 Digital I/O pin mapping of an XMC Carrier installed in an Einstruments with a X3-10M mounted on. By comparing the pinout of the Analog MDR68 input connector to the Breakout Box mapping and from here to the Digital I/O MDR 68 I obtained different results than in the pdf you posted over here. Which one shall I refer to? In the pdf you posted the right lines are referring to the breakout only, aren't they? Is there a DGND pin on the JP2 of the XMC carrier?
Thanks for your help,
Lorenzo |
|
| Back to top |
|
|
|
