jhenderson
Site Admin
Joined: 07 Mar 2006
Posts: 2252
Location: So. Cal. USA
|
 Posted: Mon Jun 08, 2009 9:50 am Post subject: Temperature related fault? |
 |
|
I have some problem with X3-10M. We used external trigger with frequency 2.04 KHz, sampling frequency is 2.1 MHz. If temperature is over 47 degree celcius, ADC would be work find. But if temperature is below 47 degree celcius, Rate of ADC (KB/s) would be decrease exponential. Why Rate of ADC decrease exponentially if temperature is below 47 degree ? And why if we use internal trigger, this temperature not disrupt system (ADC still work find and rate is still stable), are this problem have connection with our connector?
What the different external trigger 0 and external trigger 1? |
|
