Posted: Thu Apr 20, 2006 9:28 am Post subject: COFF Download problem
I'm seeing a strange problem with my Quixote. On most of my host computers, everything works fine. However, one of my host computers when I download my application or any other COFF file, the Quixote responds with the <Loading section> messages, but then it just stops.
I've tested this with the Asnap and Awave programs and they show the same behaviour. I'm guessing this is a BIOS thing (since other host boards work fine) but I'm not sure which BIOS settings to look at.
Joined: 07 Mar 2006 Posts: 105 Location: Simi Valley, CA.
Posted: Thu Apr 20, 2006 3:10 pm Post subject: COFF Download problem
Check the Bios to make sure it is in auto scan for every boot up. There is usually a PCI section for this. Also check to make sure you are not running higher then a 66Mhz. If there are multiple slots make sure there are PCI bridges for about every 4 slots.
Make sure you have interrupts enabled for this slot. If there are none in the chassis for the cPCI the Quixote will not work. Again this is in the PCI section of Bios.
Usually a rescan of the bus will set everything in motion. Also make sure that the logic is loading and configured.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum