Innovative Integration
  
TH80 Dual Channel High-Speed Digitizer with Ultra-Low Jitter Aperture Control
Features Applications
  • Dual 80MSPS A/D
  • 14 Bit Resolution
  • Sample & Mode on Ext. Trigger
  • 400MHz Input Bandwidth
  • 32MB on-board RAM
  • Long Burst Capture
  • Advanced RADAR/SONAR
  • Ultrasound
  • Radio Test Equipment

Overview

The TH80 is a dual channel high-speed digitizer of very high input bandwidth and up to 80MHz sampling speed. A 32MB on-board DDR RAM allows the capture of long burst at the full 80MHz sampling speed. Control registers are mapped on the 32-bit OMNIBUS interface and control is commanded via software on the host card.

The card can be used for fast signal digitizing between 1 and 80MSPS, acquiring gap-free burst length of up to total on-board RAM capacity. Data can then be transferred at the lower OMNIBUS rates to the mother board for post-processing and/or bus-mastering to host PC memory. The A/D conversion clock source is selected between an on-board oscillator (default 80MHz) or an external TTL clock. Error correction is performed in the logic with first order equation where gain and offset coefficients can be written via SW to on-board ROM.

This extremely versatile module is easily adapted for use in virtually any type of system. Our OMNIBUS carrier adapters are available for a range of interfaces including Desktop PCI, CompactPCI/PXI and Ethernet. This module is also readily installed onto many Innovative Integration's DSP boards including the SBC6713e and M6713.

Product Image - Click for a larger version
80130
C++ DriversWorks with WindowsOMNIBUS Compatible
TH80
Dual Channel High-Speed Digitizer with Ultra-Low Jitter Aperture Control 		Close
TH80
TH80 Datasheet
Dual Channel High-Speed Digitizer with Ultra-Low Jitter Aperture Control 		Close
Click here to download this datasheet
TH80 Block Diagram Option 1
Dual Channel High-Speed Digitizer with Ultra-Low Jitter Aperture Control 		Close
Right click the block diagram for options.

Overview

The TH80 is a dual channel high-speed digitizer of very high input bandwidth and up to 80MHz sampling speed. A 32MB on-board DDR RAM allows the capture of long burst at the full 80MHz sampling speed. Control registers are mapped on the 32-bit OMNIBUS interface and control is commanded via software on the host card.

The card can be used for fast signal digitizing between 1 and 80MSPS, acquiring gap-free burst length of up to total on-board RAM capacity. Data can then be transferred at the lower OMNIBUS rates to the mother board for post-processing and/or bus-mastering to host PC memory. The A/D conversion clock source is selected between an on-board oscillator (default 80MHz) or an external TTL clock. Error correction is performed in the logic with first order equation where gain and offset coefficients can be written via SW to on-board ROM.

This extremely versatile module is easily adapted for use in virtually any type of system. Our OMNIBUS carrier adapters are available for a range of interfaces including Desktop PCI, CompactPCI/PXI and Ethernet. This module is also readily installed onto many Innovative Integration's DSP boards including the SBC6713e and M6713.

TH80 Documentation
Dual Channel High-Speed Digitizer with Ultra-Low Jitter Aperture Control 		Close
TH80 Peripherals
Dual Channel High-Speed Digitizer with Ultra-Low Jitter Aperture Control 		Close
FIFO Cable
67013
FIFO Cable
Cable for high speed connectivity between FIFOPort compatible processor cards (30cm long)
TH80 Quick Specs
Dual Channel High-Speed Digitizer with Ultra-Low Jitter Aperture Control 		Close
Part Number: 80130-0
Family: OMNIBUS
Bus Type: PCI
Bus Width:
Bus Speed:
Form Factor: OMNIBUS
Interfaces: Ethernet
Functions: Bus Adapter
DSP: Via Baseboard
DSP Quantity: 0
DSP Speed (total):
FPGA:
FPGA Size:
FPGA Quantity: 0
A/D Channels: 2
A/D Resolution: 14-bit
A/D Rate: 1 - 80 MHz
D/A Channels: 0
D/A Resolution:
D/A Rate:
Digital IO:
Peripherals: 67013