Innovative Integration
  
AD40 AD40 module: Two 40 MHz A/D converter channels, 64K FIFO
Features Applications
  • 2 - 12 Bit, 40 MHz Independent A/D Channels
  • Large FIFO Available for Transient Capture
  • Programmable Analog Level Trigger-Pre/Post Buffering
  • Wireless
  • High-Energy Physics
  • Transient Capture

Overview

The AD40 module features two, independent, very-high-speed analog input channels making it ideal for high-speed data acquisition and transient capture systems. Each channel employs Analog Devices' AD9224 monolithic, single supply 12-bit, 40 MSPS analog to digital converter with an on-chip, high performance sample-and-hold amplifier and voltage reference. The A/D uses a multistage differential pipelined architecture with output error correction logic to provide 12-bit accuracy at up to 40 MHz data rates, and guarantees no missing codes over the full operating temperature range. A single clock input is used to control all internal conversion cycles. An out-of-range signal indicates an overflow condition which can be used with the most significant bit to determine low or high overflow. On-board circuitry adds gain/offset error adjustments for each channel to insure accurate measurements.

This extremely versatile module is easily adapted for use in virtually any type of system. Our OMNIBUS carrier adapters are available for a range of interfaces including Desktop PCI, CompactPCI/PXI and Ethernet. This module is also readily installed onto many Innovative Integration's DSP boards including the SBC6713e and M6713.

Product Image - Click for a larger version
80020
C++ DriversWorks with WindowsOMNIBUS Compatible
AD40
AD40 module: Two 40 MHz A/D converter channels, 64K FIFO 		Close
AD40
AD40
AD40 module: Two 40 MHz A/D converter channels, 64K FIFO 		Close
X5 XMC Ruggedization Level Table
AD40 Datasheet
AD40 module: Two 40 MHz A/D converter channels, 64K FIFO 		Close
Click here to download this datasheet
AD40 Documentation
AD40 module: Two 40 MHz A/D converter channels, 64K FIFO 		Close
AD40 Peripherals
AD40 module: Two 40 MHz A/D converter channels, 64K FIFO 		Close
FIFO Cable
67013
FIFO Cable
Cable for high speed connectivity between FIFOPort compatible processor cards (30cm long)
AD40 Quick Specs
AD40 module: Two 40 MHz A/D converter channels, 64K FIFO 		Close
Part Number: 80020-16,80020-17
Family: OMNIBUS
Bus Type: PCI
Bus Width:
Bus Speed:
Form Factor: OMNIBUS
Interfaces:
Functions: Bus Adapter
DSP: Via Baseboard
DSP Quantity: 0
DSP Speed (total): Via Baseboard
FPGA: No FPGA
FPGA Size:
FPGA Quantity: 0
A/D Channels: 2
A/D Resolution: 12-bit
A/D Rate: 40 MHz
D/A Channels: 0
D/A Resolution:
D/A Rate:
Digital IO:
Peripherals: 67013