Innovative Integration

Innovative Integration is a data acquisition company that designs embedded electronics with digital & analog interfaces and FPGAs for digital signal processing, software radio and data acquisition applications used in industrial and rugged environments.

FMC-1000

FMC Module with 2x 1250 MSPS 14-bit A/D, 2x 1250 MSPS 16-bit DAC with PLL and Timing Controls


  • FMC-1000

Block Diagram
  • FMC-1000

Ruggedization Level Table
  • Ruggedization Level Table

FMC-1000 Peripherals

Quick Specs
Part Number: 80325-1 · 80325-2
Family: FMC
Bus Type: FMC
Bus Width:
Bus Speed:
Form Factor: FMC
Interfaces: SFP
Functions: Data Acquisition
DSP:
DSP Quantity: 0
DSP Speed (total):
FPGA: No FPGA
FPGA Size:
FPGA Quantity: 0
A/D Channels: 2
A/D Resolution: 14-bit
A/D Rate: b1250 MSPS
D/A Channels: 2
D/A Resolution: 16-bit
D/A Rate: b1250 MSPS
Digital IO:
Peripherals:
Features
  • Two 14-bit A/D Inputs
    • 1250 MSPS
    • AC or DC coupled
  • Two 16-bit D/A outputs
    • 1250 MSPS @ 1x, 2500 MSPS @ 2x interpolation
    • AC or DC coupled
  • Sample clocks and timing and controls
    • External clock/reference input
    • Programmable PLL
    • 10 MHz, 0.5 ppm reference
    • Integrated with FMC triggers
  • FMC module, VITA 57.1
    • Low Pin Count, SERDES required
    • Compatible with Vadj 2.5V
    • Power monitor and controls
  • 6W typical (AC-coupled inputs)
  • Conduction Cooling per VITA 20 subset
  • Environmental ratings for -40° to 85°C, 9g RMS sine, 0.1g2/Hz random vibration
Applications
  • Wireless Receiver and Transmitter
  • LTE, WiMAX Physical Layer
  • RADAR
  • Medical Imaging
  • High Speed Data Recording and Playback

FMC-1000 Overview

The FMC-1000 is a high speed digitizing and signal generation FMC I/O module featuring two, 1250 MSPS A/D channels and two 1250 MSPS D/A channels supported by sample clock and triggering features.

Analog I/O may be either AC or DC coupled. Receiver IF frequencies of up to 625 MHz are supported. The sample clock is from either an ultra-low-jitter PLL or external input. Multiple cards can be synchronized for sampling.

The FMC-1000 power consumption is 12W for typical operation. The module may be conduction cooled using VITA20 standard and a heat spreading plate. Ruggedization levels for wide-temperature operation from -40 to +85C operation and 0.1 g2/Hz vibration. Conformal coating is available.

Support logic in VHDL is provided for integration with FPGA carrier cards. Specific support for Innovative carrier cards includes integration with Framework Logic tools that support VHDL/Verilog and Matlab developers. The Matlab BSP supports real-time hardware-in-the-loop development using the graphical block diagram Simulink environment with Xilinx System Generator for the FMC integrated with the FPGA carrier card.

Software tools for Innovative carrier cards include host development include C++ libraries and drivers for Windows and Linux. Application examples demonstrating the module features are provided.

©1988-2017 Innovative Integration