Innovative Integration

Innovative Integration is a data acquisition company that designs embedded electronics with digital & analog interfaces and FPGAs for digital signal processing, software radio and data acquisition applications used in industrial and rugged environments.

FMC-310

FMC Module with 4x 310 MSPS 16-bit A/D with PLL and Timing Controls


  • FMC-310

Block Diagram
  • FMC-310

Ruggedization Level Table
  • Ruggedization Level Table

FMC-310 Peripherals

Quick Specs
Part Number: 80320-0 · 80320-1
Family: FMC
Bus Type: FMC
Bus Width:
Bus Speed:
Form Factor: FMC
Interfaces: SFP
Functions: Data Acquisition
DSP:
DSP Quantity: 0
DSP Speed (total):
FPGA: No FPGA
FPGA Size:
FPGA Quantity: 0
A/D Channels: 4
A/D Resolution: 16-bit
A/D Rate: b0310 MSPS
D/A Channels: 0
D/A Resolution:
D/A Rate:
Digital IO:
Peripherals:
Features
  • Four A/D Inputs
    • 310 MSPS, 16-bit
    • AC or DC coupled
  • Sample clock generation & controls
    • External clock/reference input
    • Programmable PLL
    • 20 MHz, 0.5 ppm reference
    • Integrated with FMC triggers
  • FMC module, VITA 57.1
    • High Pin Count - no SERDES required
    • Compatible with Vadj 2.5V
    • Power monitor and controls
  • 10W typical (AC-coupled inputs)
  • Conduction cooling per VITA 57.1 subset
  • Environmental ratings for -40 to +70C
  • 9g RMS sine, 0.1g^2/Hz random vibration
Applications
  • Wireless Receiver and Transmitter
  • LTE, WiMAX Physical Layer
  • RADAR
  • Medical Imaging
  • High Speed Data Recording and Playback

FMC-310 Overview

The FMC-310 is a high speed digitizing and signal generation FMC IO module featuring four 310 MSPS A/D channels supported by sample clock and triggering features.

Analog IO may be either AC or DC coupled. Receiver IF frequencies of up to 155 MHz are supported. The sample clock is from either an ultra-low-jitter PLL or external input. Multiple cards can be synchronized for sampling.

The FMC-310 power consumption is 6W for typical operation. The module may be conduction cooled using VITA20 standard and a heat spreading plate. Ruggedization levels for wide-temperature operation from -40 to +85C operation and 0.1 g2/Hz vibration. Conformal coating is available.

Support logic in VHDL is provided for integration with FPGA carrier cards. Specific support for Innovative carrier cards includes integration with Framework Logic tools that support VHDL/Verilog and Matlab developers. The Matlab BSP supports real-time hardware-in-the-loop development using the graphical block diagram Simulink environment with Xilinx System Generator for the FMC integrated with the FPGA carrier card.

©1988-2017 Innovative Integration