Innovative Integration

Innovative Integration is a data acquisition company that designs embedded electronics with digital & analog interfaces and FPGAs for digital signal processing, software radio and data acquisition applications used in industrial and rugged environments.

X3-SD

PCI Express XMC Module, 16 Channel, 216 kHz, 24-bit Analog Input


  • X3-SD

Block Diagram

Ruggedization Level Table
  • Ruggedization Level Table

X3-SD Peripherals

Quick Specs
Part Number: 80168-0
Family: PMC/XMCe
Bus Type: PCI Express
Bus Width: VITA
Bus Speed: 42.3
Form Factor: XMC
Interfaces:
Functions: Data Acquisition · FPGA
DSP: 32 Embedded Multipliers
DSP Quantity: 1
DSP Speed (total): 075 MHz
FPGA: Spartan-3
FPGA Size: 1.8M
FPGA Quantity: 1
A/D Channels: 16
A/D Resolution: 24-bit
A/D Rate: a0216 kSPS
D/A Channels: 0
D/A Resolution:
D/A Rate:
Digital IO: 44-bit
Peripherals: 80181-0 · 80186-0 · 90181-0 · 80167-0 · 80172-0 · 80207-0 · 80116-1 · 67057 · 67058 · 67059 · 65057 · 65036
Features
  • Sixteen Input Channels
  • >110 dB SFDR
  • >105 dB S/N
  • Fully differential, +/-10V inputs
  • Sample rates up to 216 ksps
  • Programmable oversampling modes
  • Xilinx Spartan3, 1.8M gate FPGA
  • 4MB SRAM
  • Programmable PLL timebase
  • Framed, software or external triggering
  • Log acquisition timing and events
  • 44 bits digital IO on J16
  • Power Management features
  • XMC Module (75x150 mm)
  • PCI Express (VITA 42.3
Applications
  • Vibration Measurement
  • Audio and Acoustic Testing
  • Data acquisition

X3-SD Overview

The X3-SD is an XMC IO module featuring 16 simultaneously sampling, sigma delta A/D channels designed for vibration, acoustic and high dynamic range measurements.

A precision, low-jitter timebase or external clock is used for sample rate generation. Sample rates up to 216 kHz, with <10 Hz programmable resolution, are supported as well as standard audio rates. Flexible trigger methods include counted frames, software triggering and external triggering.

Data acquisition control, signal processing, buffering, and system interface functions are implemented in a Xilinx Spartan3 FPGA, 1.8M gate device. Two 1Mx16 memory devices are used for data buffering and FPGA computing memory.

The logic can be fully customized using VHDL and MATLAB using the FrameWork Logic toolset. The MATLAB BSP supports real-time hardware-in-the-loop development using the graphical, block diagram Simulink environment with Xilinx System Generator.

The PCI Express interface supports continuous data rates up to 180 MB/ s between the module and the host. A flexible data packet system implemented over the PCIe interface provides both high data rates to the host that is readily expandable for custom applications.

This extremely versatile module is easily adapted for use in virtually any type of system. Our XMC carrier adapters offer conduction and convection cooling and are available for a range of interfaces including Desktop PCI, Desktop PCI Express, Cabled PCI Express, CompactPCI, and PXI/PXI Express. This module is also readily installed into Innovative Integration's eInstrument Embedded PC, SBC-ComEx Single-Board Computer, and Andale Data Loggers.

©1988-2017 Innovative Integration