Innovative Integration
  
X5-RX PCI Express XMC Module with Four 200 MSPS 16-bit A/Ds, Virtex5 FPGA, 512MB DRAM/ 4MB SRAM
Features Applications
  • Four 200 MSPS 16-bit A/D channels
  • +/-1V, DC-Coupled, 50 ohm, MMCX inputs
  • Xilinx Virtex5, SX95T
  • 512MByte DDR2 DRAM
  • 4MByte QDR-II SRAM
  • 8 RocketIO private links, 2.5 Gbps each
  • >1 GB/s, 8-lane PCI Express Host Interface
  • Power Management features
  • XMC Module (75x150 mm)
  • PCI Express (VITA 42.3)
  • Ruggedization Levels for Wide Temperature Operation
  • Adapters for VPX, Compact PCI, Desktop PCI and Cabled PCI Express Systems
  • Wireless Receiver
  • WLAN, WCDMA, WiMAX Front End
  • RADAR
  • Medical Imaging
  • High Speed Data Recording
  • IP Development

Overview

The X5-RX is a high performance digitizing and signal processing module for wireless, RADAR and medical imaging applications. The FPGA computing core supports real-time, 200 MHz signal acquisition and processing for channelization, down-conversion and spectral analysis. For digitizing, the module features four simultaneously sampling 16-bit, 200 MSPS A/Ds.

A Xilinx Virtex5 SX95T with 512MB DDR2 DRAM and 4MB QDR-II memory provide a very high performance DSP core that is tightly integrated with the I/O and PCI Express interface. The close integration of the analog IO, memory and host interface with the FPGA enables real-time signal processing at extremely high rates exceeding 300 GMACs per second.

The X5 XMC modules couple Innovative's powerful Velocia architecture with a high performance, 8-lane PCI Express interface that provides over 1 GB/s sustained transfer rates to the host. Private links to host cards with > 1.6 GB/s capacity using P16 are provided for system integration.

The X5 family logic can be fully customized using VHDL and MATLAB using the FrameWork Logic toolset. The MATLAB BSP supports real-time hardware-in-the-loop development using the graphical, block diagram Simulink environment with Xilinx System Generator.

IP libraries for the FPGA are also available for down-conversion and channelization of up to 4096 simultaneous channels, baseband demodulation for PSK, FSK and MSK, and spectral analysis. MATLAB simulation models are provided that support logic integration in to the X5-RX Framework Logic.

Software tools for host development include C++ libraries and drivers for Windows and Linux. Application examples demonstrating the module features and use are provided.

This extremely versatile module is easily adapted for use in virtually any type of system. Our XMC carrier adapters offer conduction and convection cooling and are available for a range of interfaces including Desktop PCI, Desktop PCI Express, Cabled PCI Express, CompactPCI, and PXI/PXI Express. This module is also readily installed into Innovative Integration's eInstrument Embedded PC, SBC-ComEx Single-Board Computer, and Andale Data Loggers.

Product Image - Click for a larger version
80222
RoHS CompliantC++ DriversShips with Malibu LibrariesFrameWork Logic SupportWorks with WindowsWorks with LinuxSimulink/MATLAB Support
X5-RX
PCI Express XMC Module with Four 200 MSPS 16-bit A/Ds, Virtex5 FPGA, 512MB DRAM/ 4MB SRAM 		Close
X5-RX
X5-RX
PCI Express XMC Module with Four 200 MSPS 16-bit A/Ds, Virtex5 FPGA, 512MB DRAM/ 4MB SRAM 		Close
X5 XMC Ruggedization Level Table
X5-RX Datasheet
PCI Express XMC Module with Four 200 MSPS 16-bit A/Ds, Virtex5 FPGA, 512MB DRAM/ 4MB SRAM 		Close
Click here to download this datasheet
X5-RX Documentation
PCI Express XMC Module with Four 200 MSPS 16-bit A/Ds, Virtex5 FPGA, 512MB DRAM/ 4MB SRAM 		Close
X5-RX Peripherals
PCI Express XMC Module with Four 200 MSPS 16-bit A/Ds, Virtex5 FPGA, 512MB DRAM/ 4MB SRAM 		Close
PCI Express X1 Cable Adapter
80181-0 - more info
PCI Express X1 Cable Adapter
PCI Express to Cable adapter. PCI Express x1 PCIe 1.0a host interface
ExpressCard to X1 Cabled PCIe Adapter
80186-0
ExpressCard to X1 Cabled PCIe Adapter
ExpressCard to Single Lane Cabled PCI Express Adapter
eInstrument-DAQ Node
90181-0 - more info
eInstrument-DAQ Node
eInstruments Enclosure with Cabled PCI Express Carrier
XMCe to PCI Adapter Board
80167-0 - more info
XMCe to PCI Adapter Board
Adapt one XMC.3 (PCI Express VITA 42.3) module to a PCI slot. PCI 64 bit, 66MHz interface, XMC.3 PCI Express, 4 lane interface
XMCe to PCI Express Adapter Board
80172-0 - more info
XMCe to PCI Express Adapter Board
Adapt one XMC.3 (PCI Express VITA 42.3) module to a PCI Express slot. PCI Express x1 to XMC.3 module interface.
XMCe to PCI Express Adapter Board (eight lane)
80173-0 - more info
XMCe to PCI Express Adapter Board (eight lane)
XMC PCI Express VITA 42.3 module to a PCIe slot. PCI Express x8 to XMC.3 module interface.
XMC to CompactPCI Adapter
80207-0 - more info
XMC to CompactPCI Adapter
XMC to CompactPCI Adapter with J16 Connector Breakout
X1 PCI Express Cable
67057
X1 PCI Express Cable
5 meters, Single Lane, PCI Express Cable
X1 PCI Express Cable
67058
X1 PCI Express Cable
3 meters, Single Lane, PCI Express Cable
X1 PCI Express Cable
67059
X1 PCI Express Cable
1 meter, Single Lane, PCI Express Cable
Power Supply
80191-1
Power Supply
Power Supply for eInstruments Enclosure (12V DC Output)
50 Ohm BNC to SMB Cable (1 meter)
67021
50 Ohm BNC to SMB Cable (1 meter)
50 Ohm BNC to SMB Cable, For signal and/or external clock/int.
X5-RX Quick Specs
PCI Express XMC Module with Four 200 MSPS 16-bit A/Ds, Virtex5 FPGA, 512MB DRAM/ 4MB SRAM 		Close
Part Number: 80222-0
Family: PMC/XMCe
Bus Type: PCI Express
Bus Width: 8-lane
Bus Speed:
Form Factor: Single-width PMC
Interfaces:
Functions: Data Acquisition, Digital Receiver, DSP - Digital Signal Processor, FPGA, Software Radio
DSP:
DSP Quantity: 0
DSP Speed (total):
FPGA: Virtex-5
FPGA Size:
FPGA Quantity: 1
A/D Channels: 8
A/D Resolution: 16-bit
A/D Rate: 160 MSPS
D/A Channels: 0
D/A Resolution:
D/A Rate:
Digital IO: 16-bit
Peripherals: 80181-0, 80186-0, 90181-0, 80167-0, 80172-0, 80173-0, 80207-0, 67057, 67058, 67059, 80191-1, 67021, ,