PCIe

Contact Innovative Integration with your Hardware needs

  • The XU-TX is an XMC module which features two AC-coupled single-ended 16-bit DAC outputs with programmable DC bias. The DAC devices employed support synchronization, interpolation, and their unique output circuits allow improved frequency synthesis in the 2nd Nyquist zone. This can shift the Nyquist null frequency in the output spectrum to two times the typical Nyquist null frequency. The maximum sample rate of the DAC IC is 12 GSPS, the maximum external direct clocking rate is 6 GSPS and the on board PLL can generate clocks up to 4.8 GHz. The DACs' JESD 204B interfaces can stream data with transfer rates up to 6 GSPS.
  • The X6-400M integrates high speed digitizing and signal generation with signal processing on a PMC/XMC IO module with a powerful Xilinx Virtex 6 FPGA signal processing core, and high performance PCI Express/PCI host interface.
  • The X6-1000M integrates high-speed digitizing and signal generation with signal processing on a PMC/XMC IO module for demanding DSP applications. The tight coupling of the digitizing to the Virtex6 FPGA core realizes architectures for SDR, RADAR, and LIDAR front end sensor digitizing and processing. The PCI Express system interface sustains transfer rates over 2 GB/s for data recording and integration as part of a high performance realtime system.
  • The XA-RX is an XMC IO module featuring eight 16-bit, 125 MSPS A/D channels designed for high speed stimulus-response, ultrasound, and RADAR.
  • The XA-TX is an XMC IO module featuring eight 16-bit, 300 MSPS DAC channels designed for high speed arbitrary waveform generation, wireless transmission, and RADAR pulse generation applications.
  • The X3-SDF is an XMC IO module featuring 4 simultaneously sampling, sigma delta A/D channels designed for vibration, acoustic and high dynamic range measurements. The A/D device has programmable output rates up to 24 bits @ 2.5 MSPS and 16- bits @ 20 MSPS using the programmable filter in the A/D.
  • The X3-A4D4 is an XMC IO module featuring four 16-bit, 4 MSPS A/D channels and four 16-bit, 50 MSPS DAC channels with FPGA computing core designed for servo controls, arbitrary waveform generation and stimulusresponse applications. Low latency SAR A/D and no-pipeline DACs support real-time servo control applications. Flexible trigger methods include counted frames, software triggering and external triggering. The sample rate clock is either an external clock or on-board programmable PLL clock source. Data acquisition control, signal processing, buffering, and system interface functions are implemented in a Xilinx Spartan3A DSP, 1.8M gate device. Two 1Mx16 memories are used for data buffering and FPGA computing memory.
  • The X3-25M is an XMC IO module featuring two 16-bit, 105 MSPS A/D channels and two 16-bit, 50 MSPS DAC channels designed for high speed stimulus-response, ultrasound, and servo control applications.
  • The X3-DIO is a PCI Express XMC IO module for high speed digital IO data interfaces featuring 64bits of front-panel digital IO. The digital IO is either single-ended LVCMOS or LVDS differential pairs that is directly connected to the FPGA, for applications such as high speed pattern generation, digital recording, custom IO interfaces and controls.
  • The X3-Timing is an XMC I/O module with precision, low-noise clock generation and distribution. The module has 4 output clocks and four output triggers as well as a clock/reference input and a trigger input. The X3-Timing can also act as a system timing card in PXI systems, providing the reference clock, sample clocks and triggering.
  • The X3-Servo module features 12 simultaneously sampling A/D and DACs with an FPGA computing core. Low latency SAR A/D and fast-settling DACs support real-time servo control applications. The programmable input range and high input interface directly to many sensors, while the output is capable of driving many transducers. Front panel digital IO can be also be used as PWM or process controls.
  • Cardsharp is a user-customizable, turnkey embedded instrument that includes two A9 CPU cores. Linux runs in core 0 to provide ethernet, USB and disk connectivity while core 1 runs real-time stand-alone applications. Cardsharp is compatible with Innovative's wide assortment of ultimate-performance FMC modules. With its modular IO, scalable performance and easy to use CPU core architecture, the Cardsharp reduces time-to-market while providing the performance you need.