Innovative Integration

Innovative Integration is a data acquisition company that designs embedded electronics with digital & analog interfaces and FPGAs for digital signal processing, software radio and data acquisition applications used in industrial and rugged environments.

DR

16 Channel Digital Receiver PMC/XMC Module, (4) A/D, 14-bit, 125MHz, (2) PowerPC, 600 MHz - Xilinx Virtex II Pro FPGAs


  • DR

Block Diagram

Ruggedization Level Table
  • Ruggedization Level Table

DR Peripherals

Quick Specs
Part Number: 80123-0 · 80123-1
Family: PMC/XMC
Bus Type: PCI
Bus Width: 64-bit
Bus Speed: 66 MHz XMC 2.5Gbps x4
Form Factor: XMC
Interfaces: FIFO
Functions: Digital Receiver · FPGA · Software Radio
DSP:
DSP Quantity: 0
DSP Speed (total):
FPGA: Virtex-II Pro
FPGA Size: 4M
FPGA Quantity: 1
A/D Channels: 4
A/D Resolution: 14-bit
A/D Rate: 125 MHz
D/A Channels: 0
D/A Resolution:
D/A Rate:
Digital IO: 64-bit
Peripherals: 67021 · 80156-0 · 80166-0
Features
  • Four LTC2255, 14-bit, 125 MSPS converters
  • Virtex-II Pro FPGA, 4 Million gates
  • PCI 64/66 with P4 port to host card
  • 64MB SDRAM
  • Low-jitter PLL clock source
  • Advanced SW and firmware demo programs
  • XMC - 10 Gbps full duplex
Applications
  • Software Defined Radio (SDR)
  • Signal Identification
  • Electronic Warfare
  • Advanced RADAR
  • Hardware Testing
  • Telecom IP development

DR Overview

The DR Receiver PMC card features 16 receiver channels on one card using the most advanced architecture for ultra-fast signal capture and real-time processing. It integrates the latest analog chips with a 4M Virtex-II Pro FPGA for user-code, ample memory and flexible clocks/triggers on a 64/66 PCI mezzanine format.

High speed digital signal processing algorithms in the FPGA are developed using MATLAB and VHDL code. The FPGA Framework logic allows quick integration of custom signal processing into the data flow of the module through use of component-based modular design. DSP algorithms are rapidly designed using high-level MATLAB simulations that can be integrated into the FPGA hardware with minimal VHDL coding.

Novel features include on-board low jitter PLL clock, Sync Burst RAM dedicated to FPGA for fast, block-oriented processing and a direct PMC J4 DIO connection to the host card. This 64-bit J4 interface offers a very high-rate, low latency connection to Innovative Integration's Velocia series of DSP and FPGA compactPCI boards and this port protocol can be reconfigured in logic to communicate with third party host cards.

This extremely versatile module is easily adapted for use in virtually any type of system. Our PMC carrier adapters offer convection cooling and are available for a range of interfaces including Desktop PCI, Desktop PCI Express, and CompactPCI/PXI. This module is also readily installed onto Innovative Integration's Velocia DSP boards and within Andale Data Loggers.

©1988-2017 Innovative Integration