Innovative Integration

Innovative Integration is a data acquisition company that designs embedded electronics with digital & analog interfaces and FPGAs for digital signal processing, software radio and data acquisition applications used in industrial and rugged environments.

eInstrument-PC

Ultimate Performance Windows/Linux Embedded Computer with Dual XMC IO Sites


  • eInstrument-PC

Block Diagram

Ruggedization Level Table
  • Ruggedization Level Table

eInstrument-PC Peripherals

Quick Specs
Part Number: 90200-3 · 90200-5 · 90200-6
Family: eInstruments
Bus Type:
Bus Width:
Bus Speed:
Form Factor: Custom
Interfaces: Ethernet · Cabled PCI Express (CPEX)
Functions: Bus Adapter · Special Function
DSP:
DSP Quantity: 0
DSP Speed (total):
FPGA: No FPGA
FPGA Size:
FPGA Quantity: 0
A/D Channels: 0
A/D Resolution:
A/D Rate:
D/A Channels: 0
D/A Resolution:
D/A Rate:
Digital IO:
Peripherals: 90181-0 · 90199-1 · 90198-0 · 80212-0 · 80242-0 · 36028 · 67021 · 65037 · 67057 · 67069 · 67081 · 67083 · 68015G · 68016G · 80247-0 · 90196-0
Features
  • Industry standard COM Express CPU module with Dual XMC IO Sites
  • Scalable CPU performance from Atom, i7 Quad Core
  • Small form factor: 250 x170 mm
  • Rugged, stand-alone operation
  • Able to operate diskless and headless
  • Runs Windows or Linux applications
  • Configurable IO uses standard XMC IO modules (add anything from RF receivers to industrial control modules)
  • PCI Express IO sites (VITA 42.3) deliver >1200MB/s to CPU memory
  • Integrated timing and triggering support for IO includes optional GPS-disciplined clock
  • Supports Innovative X3, X5 and X6 I/O module features for private data channels, triggering and timing features
  • USB2.0 x6, Gigabit Ethernet, SATA x4, VGA, AC '97 audio
  • System expansion supported with Cabled PCI Express - use other eInstruments
  • Boots from SATA HDD SSD
  • Optional GPS module support
  • AC or 9-18V DC operation
Applications
  • Distributed Data Acquisition and Processing
  • Co-locate eInstrument and unit-under-test for optimized signal quality/minimized cabling
  • Limitless I/O expansion via multiple nodes
  • FPGA-based real-time (servo) control or analog I/O at rates to 400 MHz

eInstrument-PC Overview

The eInstrument-PC is a ultimate performance, embedded Windows/Linux PC. This user-customizable, turnkey embedded instrument supports a wide assortment of low-power and ultimate-performance XMC modules.

Rugged Enclosure

• Autonomous operation, running standard 32 or 64-bit Linux or Windows

• Concurrent processing and communication via PCI Express-over-cable or Gb Ethernet.

• Continuous data streaming up to 200MB/s via 10m cabled-PCIe LAN, 1Gb/s via Ethernet WAN or 400 MB/s to dual SSD disks

• Two SATA + two eSATA ports, 6 USB, VGA, cabled PCIe port, dual XMC sites (x8 and x4 lane)

Single-Supply, 9-18V DC-Only Operation

• Perfect for automotive or aircraft data loggers or waveform generators

The rugged eInstrument-PC enclosure houses the SBC-ComEx embedded PC and is compatible with the eInstrument DAQ Node (cabled PCI-Express XMC module carrier). For low power applications, this unit may be equipped with a 6W Atom processor.

©1988-2017 Innovative Integration