Innovative Integration

Innovative Integration is a data acquisition company that designs embedded electronics with digital & analog interfaces and FPGAs for digital signal processing, software radio and data acquisition applications used in industrial and rugged environments.


OMNIBUS I/O Module: Two ch 12 bit 65 MHz in, Two ch 12 bit 65 MHz out

  • RF

Block Diagram

Ruggedization Level Table
  • Ruggedization Level Table

RF Peripherals

ERROR: Unable to read description file! Please contact the webmaster.

Quick Specs
Part Number: 80020-24 · 80020-24A
Bus Type: PCI
Bus Width:
Bus Speed:
Form Factor: OMNIBUS
DSP: Via Baseboard
DSP Quantity: 0
DSP Speed (total): Via Baseboard
FPGA Size:
FPGA Quantity: 0
A/D Channels: 2
A/D Resolution: 12-bit
A/D Rate: 65 MHz
D/A Channels: 2
D/A Resolution: 12-bit
D/A Rate: 1065 MHz
Digital IO:
  • 2 - 12 Bit, 65 MHz A/D Channels
  • 2 - 12 Bit, 65 MHz D/A Channels
  • Hardware Date Packing/Unpacking for Hi-Bandwidth I/O
  • Transient Capture
  • High-Speed Data Acquistion

RF Overview

The two input channels on the RF employ Analog Devices AD9226 A/D converters with 12-bit resolution at up to 65 MHz. The input signal processing chain consists of 50 Ohm input termination, a high speed low distortion input amp, an optional programmable gain amp giving a signal amplification range of -14 dB to +34 dB, followed by a 7th order low-pass filter to the A/D. The twos complement data from the A/D converters clock into 1 KWord FIFOs, which are configured to interrupt the host card at programmable levels. Clocking is provided to the two A/Ds using either the on-board dual channel DDS or an external clock source.

This extremely versatile module is easily adapted for use in virtually any type of system. Our OMNIBUS carrier adapters are available for a range of interfaces including Desktop PCI, CompactPCI/PXI and Ethernet. This module is also readily installed onto many Innovative Integration's DSP boards including the SBC6713e and M6713.

©1988-2017 Innovative Integration