Innovative Integration

Innovative Integration is a data acquisition company that designs embedded electronics with digital & analog interfaces and FPGAs for digital signal processing, software radio and data acquisition applications used in industrial and rugged environments.


Digital Transmitter PMC/XMC Module, (4) D/A, 16-bit, 1 GHz, (2) PowerPC 600 MHz Xilinx Virtex II Pro FPGAs)

  • TX

Block Diagram

Ruggedization Level Table
  • Ruggedization Level Table

TX Peripherals

Quick Specs
Part Number: 80120-0
Family: PMC/XMC
Bus Type: PCI
Bus Width: 64-bit
Bus Speed: 66 MHz XMC 2.5Gbps x4
Form Factor: XMC
Functions: Digital Receiver · FPGA · Software Radio
DSP Quantity: 0
DSP Speed (total):
FPGA: Virtex-II Pro
FPGA Size: 4M
FPGA Quantity: 1
A/D Channels: 0
A/D Resolution:
A/D Rate:
D/A Channels: 4
D/A Resolution: 16-bit
D/A Rate: 500 MHz
Digital IO: 64-bit
Peripherals: 67021 · 80156-0 · 80166-0
  • Four AD9779, 16-bit, 1 GSPS converters
  • Virtex-II Pro FPGA, 4 Million gates
  • PCI 64/66 with P4 port to host card
  • 128MB SDRAM plus 2MB RAM for FPGA
  • Low-jitter PLL clock source
  • Advanced SW and firmware demo programs
  • Software Defined Radio (SDR)
  • Arbitrary Waveform Generation
  • Electronic Warfare
  • Advanced RADAR
  • Telecom Hardware Testing
  • IP development

TX Overview

The TX VelociaPMC transmitter card features the most advanced architecture for ultra-fast signal generation and real-time processing in wide-band radio systems and similar wide spectrum applications. It integrates the latest analog circuit chips with a large FPGA for user-code, ample memory and flexible clocks/triggers on a 64/66 PCI mezzanine format. Novel features include a combination of large, user-programmable FPGA, 1 GSPS DACs, on-board low jitter PLL clock, Sync Burst RAM dedicated to FPGA for fast, block-oriented processing and a direct PMC/XMC J4 DIO connection to the host card. This 64-bit J4 interface offers a 1.6GB/s transfer capable, low latency connection to Innovative Integration's Velocia series of DSP and FPGA compactPCI boards and this port protocol can be reconfigured in logic to communicate with third party host cards.

This extremely versatile module is easily adapted for use in virtually any type of system. Our PMC carrier adapters offer convection cooling and are available for a range of interfaces including Desktop PCI, Desktop PCI Express, and CompactPCI/PXI. This module is also readily installed onto Innovative Integration's Velocia DSP boards and within Andale Data Loggers.

©1988-2017 Innovative Integration