Innovative Integration

Innovative Integration is a data acquisition company that designs embedded electronics with digital & analog interfaces and FPGAs for digital signal processing, software radio and data acquisition applications used in industrial and rugged environments.


PCI Express XMC Module with 8 simultaneous channels of 25 MSPS 16-bit A/D, and 1.8M FPGA with DSP

  • X3-10M

Block Diagram

Ruggedization Level Table
  • Ruggedization Level Table

X3-10M Peripherals

Quick Specs
Part Number: 80192-0
Family: PMC/XMCe
Bus Type: PCI Express
Bus Width: 8-lane
Bus Speed:
Form Factor: XMC
Functions: Data Acquisition · DSP - Digital Signal Processor · FPGA
DSP: 84 / 126 DSP48 Elements
DSP Quantity: 1
DSP Speed (total): 105 MHz
FPGA: Spartan-3A
FPGA Size: 1.8M
FPGA Quantity: 1
A/D Channels: 8
A/D Resolution: 16-bit
A/D Rate: b0025 MSPS
D/A Channels: 0
D/A Resolution: 0
D/A Rate: 0
Digital IO: 44-bit
Peripherals: 80181-0 · 80186-0 · 90181-0 · 80167-0 · 80172-0 · 80173-0 · 80207-0 · 80116-1 · 67057 · 67058 · 67059 · 65057 · 67060 · 67062 · 65036
  • 8 simultaneously sampling 16-bit, 25 MSPS A/Ds
  • Programmable input: +/-2V, +/-1V, +/-0.4V, +/-0.1V
  • High impedance, differential inputs
  • Xilinx Spartan3A DSP, 1.8M gate FPGA
  • 4MB SRAM
  • Programmable Low Jitter PLL timebase
  • Framed, software or external triggering
  • Log acquisition timing and events
  • 44 bits digital IO on P16
  • Power Management features
  • XMC Module (75x150 mm)
  • PCI Express (VITA 42.3)
  • Multichannel sensor interface
  • Electronic Counter Measures (ECM)
  • Neuro-physical instrumentation
  • High speed motion recording
  • Spectral Analysis

X3-10M Overview

The X3-10M is an XMC IO module featuring eight simultaneously sampling 16-bit, 25 MSPS A/D channels designed for high speed instrumentation and analysis for neuro-physical, high speed motion analysis, and high speed data acquisition applications.

Flexible trigger methods include counted frames, software triggering and external triggering. The sample rate clock is either an external clock or on-board programmable PLL clock source.

Data acquisition control, signal processing, buffering, and system interface functions are implemented in a Xilinx Spartan3A DSP FPGA, 1.8M gate device. Two 512Kx32 memory devices are used for data buffering and FPGA computing memory.

The logic can be fully customized using VHDL and MATLAB using the FrameWork Logic toolset. The MATLAB BSP supports real-time hardware-in-the-loop development using the graphical, block diagram Simulink environment with Xilinx System Generator.

The PCI Express interface supports continuous data rates up to 180 MB/ s between the module and the host. A flexible data packet system implemented over the PCIe interface provides both high data rates to the host that is readily expandable for custom applications.

This extremely versatile module is easily adapted for use in virtually any type of system. Our XMC carrier adapters offer conduction and convection cooling and are available for a range of interfaces including Desktop PCI, Desktop PCI Express, Cabled PCI Express, CompactPCI, and PXI/PXI Express. This module is also readily installed into Innovative Integration's eInstrument Embedded PC, SBC-ComEx Single-Board Computer, and Andale Data Loggers.

©1988-2017 Innovative Integration • Privacy Policy