Innovative Integration

Innovative Integration is a data acquisition company that designs embedded electronics with digital & analog interfaces and FPGAs for digital signal processing, software radio and data acquisition applications used in industrial and rugged environments.


PCI Express XMC Module with Dual channel 1 GSPS,12-bit Digitizer, Virtex5 FPGA and 512MB Memory

  • X5-G12

Block Diagram

Ruggedization Level Table
  • Ruggedization Level Table

X5-G12 Peripherals

Quick Specs
Part Number: 80243-0 · 80243-1 · 80243-1-L1 · 80243-1-L2 · 80243-1-L3 · 80243-1-L4 · 80243-2 · 80243-3 · 80243-3-L1 · 80243-3-L2 · 80243-3-L3 · 80243-3-L4
Family: PMC/XMCe
Bus Type: PCI Express
Bus Width: 8-lane
Bus Speed:
Form Factor: XMC
Functions: Data Acquisition · Digital Receiver · DSP - Digital Signal Processor · FPGA · Software Radio
DSP: 640 DSP48 Elements
DSP Quantity: 1
DSP Speed (total): 250 MHz
FPGA: Virtex-5
FPGA Size: SX95T / LX155T
FPGA Quantity: 1
A/D Channels: 2
A/D Resolution: 12-bit
A/D Rate: 1 GSPS
D/A Channels: 0
D/A Resolution:
D/A Rate:
Digital IO: 33-bit
Peripherals: 67048 · 80172-0 · 80173-0 · 80167-0 · 80207-0 · 90181-0 · 80246-0
  • Two 1 GSPS, 12-bit A/D channels
  • 2 GSPS, 12-bit single channel mode
  • +/-1V, 50 ohm, DC or AC coupled inputs
  • Xilinx Virtex5, SX95T or LX155T FPGA
  • 512MB DDR2 DRAM
  • 8 Rocket IO private links, 2.5 Gbps each
  • >1 GB/s, 8-lane PCI Express Host Interface
  • Power Management features
  • XMC Module (75x150 mm)
  • PCI Express (VITA 42.3)
  • Ruggedization Levels for Wide Temperature Operation
  • Adapters for VPX, Compact PCI, Desktop PCI and Cabled PCI Express Systems
  • Wireless Receiver
  • WLAN, WCDMA, WiMAX front end
  • Medical Imaging
  • High Speed Data Recording
  • IP development

X5-G12 Overview

The X5-G12 is an XMC I/O module featuring dual channels of 1 GSPS 12-bit digitizing with a Virtex5 FPGA computing core, DRAM and SRAM memory, and eight lane PCI Express host interface.

A Xilinx Virtex5 SX95T or LX155T with 512 MB DDR2 DRAM and 4MB QDR-II memory provides a very high performance DSP core for demanding applications such RADAR and direct RF digitizing. The close integration of the analog IO, memory and host interface with the FPGA enables real-time signal processing at rates exceeding 300 GMAC/s.

The X5 XMC modules couple Innovative's powerful Velocia architecture with a high performance, 8-lane PCI Express interface that provides over 1 GB/s sustained transfer rates to the host. Private links to host cards with >1.6 GB/s capacity using P16 are provided for system integration.

The X5 family can be fully customized using VHDL and MATLAB using the FrameWork Logic toolset. The MATLAB BSP supports real-time hardware-in-the-loop development using the graphical, block diagram Simulink environment with Xilinx System Generator.

IP logic cores are also available for SDR applications that provide from 16 to 4096 DDC channels. These IP cores transform the X5 modules into versatile receivers using proven logic cores from R-Interface and Innovative, ready for integration into your application.

Software tools for host development include C++ libraries and drivers for Windows and Linux. Application examples

demonstrating the module features and use are provided, including logging A/D samples to disk.

This extremely versatile module is easily adapted for use in virtually any type of system. Our XMC carrier adapters offer conduction and convection cooling and are available for a range of interfaces including Desktop PCI, Desktop PCI Express, Cabled PCI Express, CompactPCI, and PXI/PXI Express. This module is also readily installed into Innovative Integration's eInstrument Embedded PC, SBC-ComEx Single-Board Computer, and Andale Data Loggers.

©1988-2017 Innovative Integration • Privacy Policy